| Reference | Diamètre | Longueur | Quantité | Stock quantity | Availability | Price incl tax |
|---|---|---|---|---|---|---|
|
BKK-D-MP-2050
|
Ø 0.8 mm | 10 mm | 25 | 0 |
To order - lead times vary according to supplier
|
2.10 (CHF) incl tax
|
|
BKK-D-MP-2051
|
Ø 0.1 mm | 10 mm | 25 | 0 |
To order - lead times vary according to supplier
|
2.10 (CHF) incl tax
|
|
BKK-D-MP-2052
|
Ø 1.2 mm | 10 mm | 25 | 0 |
To order - lead times vary according to supplier
|
2.10 (CHF) incl tax
|
|
BKK-D-MP-2053
|
Ø 1.4 mm | 10 mm | 25 | 0 |
To order - lead times vary according to supplier
|
2.10 (CHF) incl tax
|
|
BKK-D-MP-2054
|
Ø 1.6 mm | 10 mm | 25 | 0 |
To order - lead times vary according to supplier
|
2.10 (CHF) incl tax
|
The BKK Single Barrel Crimp Sleeve is a rigging accessory designed to create neat, consistent, and durable loops on a metal leader. Its purpose is simple: help you make a clean crimp with no sharp burrs, while delivering excellent holding power to protect the wire, swivels, snaps, and the overall longevity of your setup.
Thanks to a geometry designed to guide the wire naturally, this fishing crimp makes it easier to form tidy loops and helps reduce stress points. The result is a more reliable and more uniform rig, especially valuable when leader strength is essential in predator fishing.
Made from copper, this crimp combines controlled malleability with strength, delivering an effective crimp when the tool is properly adjusted. It also features a discreet, corrosion-resistant finish, useful for repeated use and harsh conditions such as spray, moisture, and frequent handling.
Developed for use with 7x7 (49-strand) stainless steel wire, it is engineered for a high level of reliability on this type of material: the wire retains good flexibility, and when the crimp is properly executed, it creates a strong loop while preserving smooth movement in the rig.
Clean, professional loops: the sleeve shape helps produce a uniform crimp with a neat finish, ideal when you want identical leaders from one rig to another.
Reduced risk of sharp edges: by limiting protruding areas, you lower the chance of damaging the wire or creating a weak point. This is key to keeping a 7x7 wire leader performing well over time.
High holding power: when crimped correctly, the sleeve offers excellent retention, which is important when tension is high (hard casts, fights, hooksets, repeated pulls).
Smoother movement: the loop is designed to remain functional by avoiding overly sharp angles. The result is a rig that works better, especially with lures, snap systems, or more technical setups requiring both flexibility and reliability.
Suitable for 7x7 (49-strand) wire: designed for this type of wire, the sleeve meets the needs of anglers looking for the right balance between strength and flexibility, essential for pike fishing and other toothy predators.
To get the best results from your crimp sleeves, use a crimping tool that matches the sleeve diameter and the wire. Choose a sleeve size that matches the wire: the goal is for the wire to pass correctly through the sleeve without excessive play, while still avoiding force during insertion.
Form a clean loop (with or without a protective sleeve depending on your preference), then crimp progressively, following the tool's compression profile. A successful crimp should be firm and even: it should not crush the wire to the point of cutting or damaging the strands, and it should not remain too loose. After crimping, visually check alignment, then perform a reasonable pull test before use.
Finally, rinse and dry your rigs after outings in dirty or corrosive conditions, and inspect the leader regularly: any wire that is marked or pinched should be replaced, even if the sleeve still looks intact.
Question 1: What is a crimp sleeve used for in fishing?
Answer: A crimp sleeve is used to lock a wire and form a strong, secure loop on a leader, without tying a knot in the steel wire.
Question 2: Is this product suitable for all steel wires?
Answer: It is specifically developed for 7x7 (49-strand) stainless steel wire. For other wire constructions, it is recommended to check compatibility and carry out a pull test.
Question 3: Do I need a special tool?
Answer: Yes, a suitable crimping tool is strongly recommended to achieve a consistent, reliable, and repeatable crimp.
Question 4: How do I choose the right sleeve size?
Answer: Choose a diameter that matches the wire being used: the wire must pass correctly to form the loop, then be held firmly after crimping without damaging the strands.
